TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005

TM-9-2520-215-34 - Page 217 of 508

TM 9--2520--215--34

0043 00--3

OUTPUT REDUCTION GEAR PLANETARY CARRIER ASSEMBLY AND

BRAKE HOUSING ASSEMBLY REPLACEMENT – CONTINUED

0043 00

REMOVAL – Continued

5. Install adapters (item 42, WP 0088 00) in output reduction gear carrier assembly (10) lifting holes and, using puller

attachment (item 8, WP 0088 00), loosen output reduction gear planetary carrier assembly (10) for removal.

Remove output reduction gear planetary carrier assembly (10).

INSTALLATION

1. Place housing assembly in fabricated stand. Install spacer (11), small diameter down. With a suitable lifting

device and sling, install output reduction gear planetary carrier assembly (10).