TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005

TM-9-2520-215-34 - Page 225 of 508

TM 9--2520--215--34

0044 00--5

OUTPUT REDUCTION GEAR PLANETARY CARRIER ASSEMBLY REPAIR –

CONTINUED

0044 00

ASSEMBLY

WARNING

Use gloves or tongs when handling dry ice or chilled parts to prevent injury.

NOTE

Chill new spindles in dry ice for approximately one hour before installation.

1. Install planetary carrier spacer (9), flange end first, into output reduction gear planetary carrier assembly (2).

2

9

2. Lubricate inside diameter of pinion of planetary carrier pinion (5) with oil--soluble grease. Place thrust washer (6)

and thrust washer (7) on one side of planetary carrier pinion (5). Place thrust washer (6) inside planetary carrier

pinion (5).

6

7

5

8

7

6