TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005

TM-9-2520-215-34 - Page 233 of 508

TM 9--2520--215--34

OUTPUT REDUCTION GEAR OUTPUT SHAFT HOUSING AND RING GEAR

ASSEMBLIES REPLACEMENT – CONTINUED

0045 00

INSTALLATION – Continued

4. Place housing assembly (2) into fabricated stand. Install planetary carrier assembly (12).

5. Install ring gear assembly (1) aligning two dowel pins (13) with holes in housing assembly (2). Shoulder (14) of

ring gear assembly (1) must be up.

NOTE

FOLLOW--ON MAINTENANCE:

Install output reduction planetary

carrier assembly (WP 0043 00)

END OF WORK PACKAGE

0045 00--5/6 blank