TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005

TM-9-2520-215-34 - Page 237 of 508

TM 9--2520--215--34

0047 00--1

OUTPUT REDUCTION GEAR OUTPUT SHAFT AND RELATED PARTS REPAIR

0047 00

THIS WORK PACKAGE COVERS:

Disassembly, Cleaning, Inspection, Fit and Wear Limits, Assembly

INITIAL SETUP:

Tools and Special Tools

General mechanic’s tool kit (item 1, WP 0088 00)

Arbor press (item 20, WP 0088 00)

Oil seal replacer (item 11, WP 0088 00)

Stud remover/setter (item 36, WP 0088 00)

Materials/Parts

Seal assembly (item 4, WP 0087 00)

Preformed packing (item 71, WP 0087 00)

Preformed packing (item 72, WP 0087 00)

Grease (item 4, WP 0085 00)

Lint free paper (item 8, WP 0085 00)

Lubplate (item 14, WP 0085 00)

Dry--cleaning solvent (item 3, WP 0085 00)

Gasket (item 3, WP 0087 00)

Quick dry solvent (item 10, WP 0085 00)

Equipment Conditions

Output reduction gear output shaft and related parts

removed (WP 0045 00)

DISASSEMBLY

1. Insert three equal lengths of 3/8 inch diameter drill rod into three holes in flange of output shaft assembly (1).

2. Place suitable plate on three pieces of drill rod. Press out roller bearing (2), output shaft bearing cap (3), seal

assembly (4) and spacer (5) as an assembly from output shaft assembly (1).