TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005

TM-9-2520-215-34 - Page 241 of 508

TM 9--2520--215--34

0047 00--5

OUTPUT REDUCTION GEAR OUTPUT SHAFT AND RELATED PARTS REPAIR

– CONTINUED

0047 00

ASSEMBLY – Continued

WARNING

WARNING

6. Completely clean selected studs (10) by washing in dry--cleaning solvent. Blow dry with compressed air.

7. Carefully examine threads of studs (10) for presence of burrs, nicks and foreign material. Repair defects found.

8. Apply small amount of lubplate lubricant (item 14, WP 0085 00) to threads of studs (10) and tapped holes in

shaft.

9. Insert studs (10) in output shaft assembly (1) flange. Finish driving studs (10) to proper setting heights using stud

driving tool set to 320 lb--ft (433.9 N

S

m).

07i251ma

1

10