TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005

TM-9-2520-215-34 - Page 249 of 508

TM 9--2520--215--34

0049 00--1

OUTPUT REDUCTION GEAR BRAKE HUB ASSEMBLY REPLACEMENT

0049 00

THIS WORK PACKAGE COVERS:

Removal, Installation

INITIAL SETUP:

Tools and Special Tools

General mechanic’s tool kit (item 1, WP 0088 00)

Lifting sling (item 13, WP 0088 00)

Suitable lifting device (2000 lb minimum capacity)

Compressor assembly (item 3, WP 0088 00)

Torque wrench (item 26, WP 0088 00)

Fabricated stand (figure 2, WP 0089 00)

Retaining ring pliers set (item 21, WP 0088 00)

Materials/Parts

Snap ring (item 45, WP 0087 00)

Flat washer (item 84, WP 0087 00)

Retainer packing (item 17, WP 0087 00)

Equipment Conditions

Brake apply reaction plate assembly and retainer plate

removed (WP 0040 00)

REMOVAL

NOTE

Disassembly procedures for the right and left output reduction gear

assemblies are identical. Only the left assembly is illustrated.

1. Flatten tab on flat washer (1), remove bolt (2), flat washer (1) and retainer packing (3) with steel ball. Discard flat

washer and retainer packing.