TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005

TM-9-2520-215-34 - Page 256 of 508

TM 9--2520--215--34

0049 00--8

OUTPUT REDUCTION GEAR BRAKE HUB ASSEMBLY REPLACEMENT –

CONTINUED

0049 00

INSTALLATION – Continued

8. Install new retainer packing (3), aligning hole (20) with notch (21).

9. Install ball (22), bolt (2) and new flat washer (1). Tighten bolt (2) to 215 to 250 lb--ft (291.5 to 339 N

S

m).

NOTE

FOLLOW--ON MAINTENANCE:

Install brake apply reaction plate assembly

and retainer (WP 0040 00)

END OF WORK PACKAGE