TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005

TM-9-2520-215-34 - Page 263 of 508

TM 9--2520--215--34

RANGE SELECTOR LINKAGE ADJUSTMENT

0051 00

THIS WORK PACKAGE COVERS:

Adjustment

INITIAL SETUP:

Tools and Special Tools

General mechanic’s tool kit (item 1, WP 0088 00)

Equipment Conditions

Vehicle parked and blocked (TM 9--2350--256--10)

ADJUSTMENT

1. With range selector linkage disconnected at control valve body assembly, position vehicle range selector control in

reverse range position.

2. Position shift position indicator on control valve in reverse range (R) position.

3. Adjust range selector linkage until aligned with lever on control valve body assembly so that connecting clevis pin

canbeinsta

l

ledfree

ly

.

4. Check position of vehicle selector control in all ranges and neutral against position of shift indicator on control

valve. All positions should coincide.

END OF WORK PACKAGE

0051 00--1/2 blank