TM-9-2520-215-34
CROSS-DRIVE TRANSMISSION ASSEMBLY
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
DECEMBER 2005
TM-9-2520-215-34 - Page 261 of 508
TM 9--2520--215--34
0050 00--5
OUTPUT REDUCTION GEAR BRAKE HUB ASSEMBLY REPAIR –
CONTINUED
0050 00
ASSEMBLY – Continued
2. Install new outer snap ring (7), if removed.
3. Insert sun gear (2), bearing down, into splined hub of brake plate hub (1).
4. Turn brake hub assembly (1) over on work table and install new inner snap ring (6) in inside groove of
sun gear (2).
5. Insert brake baffle (4) in brake hub assembly (1). Align roller key (5) with groove in brake hub assembly (1).
Back to Top
