TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005

TM-9-2520-215-34 - Page 247 of 508

TM 9--2520--215--34

0048 00--1

BRAKE HOUSING ASSEMBLY REPAIR

0048 00

THIS WORK PACKAGE COVERS:

Disassembly, Cleaning, Inspection, Fit and Wear Limits, Assembly

INITIAL SETUP:

Tools and Special Tools

General mechanic’s tool kit (item 1, WP 0088 00)

Drill portable electric (item 30, WP 0088 00)

Drill twist set (item 31, WP 0088 00)

C--clamps (item 32, WP 0088 00)

Materials/Parts

Rivet (4) (item 102, WP 0087 00)

Equipment Conditions

Brake housing assembly removed (WP 0043 00)

DISASSEMBLY

1. Center punch four formed rivet heads (1) on outside of brake housing assembly (2).

1

2

2. Drill out four formed rivet (1) heads, approximately

¼

inch deep.

3. Remove four formed rivets (1) heads.

4. Punch four formed rivets (1) out of brake housing assembly (2) and wear plate (3). Remove wear plate (3).

Discard rivets.

1

2

3