TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005

TM-9-2520-215-34 - Page 215 of 508

TM 9--2520--215--34

0043 00--1

OUTPUT REDUCTION GEAR PLANETARY CARRIER ASSEMBLY AND

BRAKE HOUSING ASSEMBLY REPLACEMENT

0043 00

THIS WORK PACKAGE COVERS:

Removal, Installation

INITIAL SETUP:

Tools and Special Tools

General mechanic’s tool kit (item 1, WP 0088 00)

Lifting sling (item 13, WP 0088 00)

Suitable lifting device (2000 lb capacity min)

Socket wrench, face, spanner (item 17, WP 0088 00)

Adapter (2) (item 42, WP 0088 00)

Puller attachment, mechanical (item 8, WP 0088 00)

Torque wrench (item 26, WP 0088 00)

Fabricated stand (figure 2, WP 0089 00)

Materials/Parts

White lead (item 13, WP 0085 00)

Abrasive cloth (item 2, WP 0085 00)

Snap ring (18) (item 45, WP 0087 00)

Preformed packing (item 34, WP 0087 00)

Equipment Conditions

Brake hub assembly removed (WP 0049 00)

REMOVAL

1. Drive out pin (1) securing nut (2).

1

2

2. Using spanner face wrench socket (item 17, WP 0088 00), loosen but do not remove nut (2). Use soft metal block

to prevent output shaft (3) from turning.