TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005
TM-9-2520-215-34

  TM-9-2520-215-34 - Page 216 of 508

TM 9--2520--215--34
0043 00--2
OUTPUT REDUCTION GEAR PLANETARY CARRIER ASSEMBLY AND
BRAKE HOUSING ASSEMBLY REPLACEMENT – CONTINUED
0043 00
REMOVAL – Continued
3. Install a 3/4--16 eye bolt in output shaft (3) and remove assembly from stand. Remove 20 bolts (4).
4. Place assembly in fabricated stand. Remove brake housing assembly (5), 18 pins (6), 18 snap rings (7) and 18
springs (8). Remove nut (2) and seal ring (9). Discard snap rings and seal ring.


Back to Top