TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005

TM-9-2520-215-34 - Page 203 of 508

TM 9--2520--215--34

0040 00--1

OUTPUT REDUCTION GEAR BRAKE APPLY REACTION PLATE

REPLACEMENT

0040 00

THIS WORK PACKAGE COVERS:

Removal, Installation

INITIAL SETUP:

Tools and Special Tools

General mechanic’s tool kit (item 1, WP 0088 00)

Lifting sling (item 13, WP 0088 00)

Suitable lifting device (2000 lb capacity min)

Fabricated stand (figure 2, WP 0089 00)

Materials/Parts

Self--locking bolt (2) (item 108, WP 0087 00)

Self--locking bolt (27) (item 67, WP 0087 00)

Equipment Conditions

Output reduction gear assembly removed

(TM 9--2350--256--20)

REMOVAL

NOTE

Removal procedures for the right and left output reduction gear assemblies are identical.

Only the left assembly is illustrated.

1. Using a suitable lifting device and lifting sling, position output reduction gear assembly in fabricated stand. Do not

remove sling. Remove all self--locking bolts (1) except those under lever (2) and those retaining stop (3). Discard

self--locking bolts.