TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005

TM-9-2520-215-34 - Page 351 of 508

TM 9--2520--215--34

0068 00--1

TORQUE CONVERTER TURBINE SHAFT ASSEMBLY REPAIR

0068 00

THIS WORK PACKAGE COVERS:

Disassembly, Cleaning, Inspection, Fit and Wear Limits, Assembly

INITIAL SETUP:

Tools and Special Tools

General mechanic’s tool kit (item 1, WP 0088 00)

Retaining ring pliers (item 21, WP 0088 00)

Arbor press (item 20, WP 0088 00)

Materials/Parts

Seal ring (6) (item 30, WP 0087 00)

Retaining ring (2) (item 42, WP 0087 00)

Equipment Conditions

Torque converter turbine shaft assembly removed

(WP 0067 00)

DISASSEMBLY

1. Remove torque converter turbine shaft assembly (2) and parts attached as a unit. Remove six hook type seal

rings (1) from grooves in torque converter turbine shaft (2). Discard seal rings.

2. Remove snap ring (3) and low range sun gear (4). Discard snap ring.

3. Remove intermediate range sun gear (5), ball bearing (6) and bearing retainer (7) as a unit.

07i024mb

3

7

5

6

4