TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005

TM-9-2520-215-34 - Page 345 of 508

TM 9--2520--215--34

0066 00--1

INTERMEDIATE RANGE PLANETARY CARRIER ASSEMBLY REPAIR

0066 00

THIS WORK PACKAGE COVERS:

Disassembly, Cleaning, Inspection, Fit and Wear Limits, Assembly

INITIAL SETUP:

Tools and Special Tools

General mechanic’s tool kit (item 1, WP 0088 00)

Arbor press (item 20, WP 0088 00)

Materials/Parts

Technical petrolatum (item 9, WP 0085 00)

Equipment Conditions

Intermediate range planetary carrier assembly

removed (WP 0065 00)

References

TM 9--2350--292--10

NOTE

Do not disassemble intermediate carrier assembly unless replacement is necessary.

DISASSEMBLY

1. Place intermediate carrier assembly (1), splined flange down, in a press. Position support to allow clearance for

removing four spindles (2).

NOTE

Be careful not to lose lock balls when pressing out spindles.

2. Press out four spindles (2) and lock ball (3). Remove pinion (4), thrust washers (5), and roller bearings (6).

2

3

5

4

6

5