TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005

TM-9-2520-215-34 - Page 339 of 508

TM 9--2520--215--34

0064 00--13

TORQUE CONVERTER AND RELATED PARTS REPAIR – CONTINUED

0064 00

ASSEMBLY – Continued

16. Turn first stator assembly (10) over carefully. Install assembly, flat side down, onto cam roller race (9). As the

assembly slides onto race, fixture will be pushed out and can be removed.

17. Install 3/16--inch lockball (12) into pocket on cam roller race (9). Retain lockball (12) with grease. Install thrust

washer retainer (11). Align half--round notch on inner diameter with lockball (12). Side with 16 radial grooves fits

down against first stator thrust washer.