TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005

TM-9-2520-215-34 - Page 335 of 508

TM 9--2520--215--34

0064 00--9

TORQUE CONVERTER AND RELATED PARTS REPAIR – CONTINUED

0064 00

ASSEMBLY – Continued

5. Install stator thrust washer (22), grooved side first, into stator. Align holes with those in stator.

22

NOTE

In the first--stator can, shallow end of the cam roller pockets is toward counterclockwise

direction. In the second--stator cam, shallow end of cam roller pockets is toward clockwise

direction (when viewed from flat side).

6. Install stator cam (21) into stator. Two index marks (28) on stator cams (21) fall between the single marks (29) on

stators.