TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005

TM-9-2520-215-34 - Page 327 of 508

TM 9--2520--215--34

0064 00--1

TORQUE CONVERTER AND RELATED PARTS REPAIR

0064 00

THIS WORK PACKAGE COVERS:

Disassembly, Cleaning, Inspection, Fit and Wear Limits, Assembly

INITIAL SETUP:

Tools and Special Tools

General mechanic’s tool kit (item 1, WP 0088 00)

Arbor press (item 20, WP 0088 00)

Torque wrench (item 22, WP 0088 00)

Hammer (item 35, WP 0088 00)

Fixture (item 4, WP 0088 00)

Retaining ring pliers (item 21, WP 0088 00)

Materials/Parts

Grease (item 4, WP 0085 00)

Retaining ring (item 73, WP 0087 00)

Material/Parts -- continued

Retaining ring (item 18, WP 0087 00)

Retaining ring (item 15, WP 0087 00)

Screw (18) (item 58, WP 0087 00)

Self--locking bolt (11) (item 80, WP 0087 00)

Self--locking bolt (12) (item 103, WP 0087 00)

Equipment Conditions

Torque converter housing assembly removed

(WP 0061 00)

DISASSEMBLY

1. Remove 11 self--locking bolts (1) retaining turbine hub retainer (2). Discard self--locking bolts.

2. Using a soft--faced mallet, tap turbine hub (3) to dislodge it from turbine (4).