TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005

TM-9-2520-215-34 - Page 326 of 508

TM 9--2520--215--34

0063 00--2

TORQUE CONVERTER PUMP ASSEMBLY REPLACEMENT – CONTINUED

0063 00

INSTALLATION

1. Install torque converter pump assembly (4) and stator assembly (3) on ground sleeve (2).

2. Install nut (1), flat side first, onto ground sleeve (2). Torque nut (1) to 300 lb--ft (406.8 N

S

m). Stake thin outer lip

of nut (1) into two opposite grooves in ground sleeve (2).

NOTE

FOLLOW--ON MAINTENANCE:

Install torque converter turbine shaft

assembly (WP 0067 00)

END OF WORK PACKAGE