TM-9-2520-215-34

CROSS-DRIVE TRANSMISSION ASSEMBLY

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 2005
TM-9-2520-215-34

  TM-9-2520-215-34 - Page 340 of 508

TM 9--2520--215--34
0064 00--14
TORQUE CONVERTER AND RELATED PARTS REPAIR – CONTINUED
0064 00
ASSEMBLY – Continued
18. Wrap new external snap ring (8) into groove in cam roller race (9) on first stator assembly (10).
19. Position turbine hub (3) concave side down on press bed. Position new internal snap ring (7). Install turbine
bearing (6) using a sleeve, between press arm and bearing inner race, seat bearing (6) against shoulder of
turbine hub (3). Install new snap ring (5).
20. Install turbine hub retainer (2), shoulder side first, into turbine (4).


Back to Top