TM-9-2520-234-35

POWER TRAIN ASSEMBLY; ALLISON MODEL XTG411-2A

TECHNICAL MANUAL; FIELD AND DEPOT MAINTENANCE MANUAL

JULY 1962

TM-9-2520-234-35 - Page 114 of 323

CHAP 5,

SEC 1]

DISASSEMBL Y

PAR

74,

STEPS

17-2 0

Figure 55 (Step 17)

Install three mounting bolts (A) in jackscrew

holes. Attach sling (B) and remove adapter (C)

and gear (D). Remove gasket (E). Caution:

While lifting adapter, be careful t o prevent

gear from dropping.

Figure 56 (Step 18)

If input transfer drive gear (A) remained with

flange adapter assembly (B), position the as-

sembly in a press. Press gear (A) and its

bearings, as an assembly, from the adapter.

Figure 57 (Iltep 19)

Remove plug (,4), gasket (B) and oil screen ((C)

from input tramsfer h o IIs i n g (D). Using a

5/8-inch wrenc:h, remov(! self- locking bolt (E)

and flat washer (F).

*m

Figure 58 (f3tep 20)

Using a hammer and chisel, straighten lock

strip (A). Re:move two bolts (B), lock strip

(A) and strap (C).

82