TM-9-2520-234-35

POWER TRAIN ASSEMBLY; ALLISON MODEL XTG411-2A

TECHNICAL MANUAL; FIELD AND DEPOT MAINTENANCE MANUAL

JULY 1962

TM-9-2520-234-35 - Page 137 of 323

PAR

82-8 3

TORQUE CONVERTER REBUIL D

Section IV. TORQUE CONVERTER—REBUIL D

CHAP

5,

SEC

I V

82. DESCRIPTIO N

Refer to p a r. 9 for description of the

torque converter assembly.

(5)

Using spanner wrench 8351495, re-

move the converter lock nut (fig. 144).

(6) Remove the double-row ball bearing

from the hub of the converter cover.

83.

DISASSEMBLY (fig. 373, fold-out 2)

Note . All related items not covered

in a through d , below, were removed

from the transmission as outlined in

par. 74, steps 1 through 25. N o

further disassembly of those parts

is required.

a . Torque Converter Cove r

(1) Using a 5/8-inch wrench, remove

24 self-locking bolts retaining the input drive

transfer gear (fig. 142). Remove the gear.

(2) Remove the retaining ring from the

torque converter support bearing.

(3) Remove the bearing support sleeve.

(4) Using a hammer and punch, bend

the lip of the converter lock nut away from the

notches in the hub of the torque converter

cover (fig. 143).

Figure 143. Straightening lip of torque converter

lock nut

Figure 142. Removing (or installing) input drive

transfer gear

Figure 144. Removing (or installing) converter lock nut

10 5