TM-9-2520-234-35

POWER TRAIN ASSEMBLY; ALLISON MODEL XTG411-2A

TECHNICAL MANUAL; FIELD AND DEPOT MAINTENANCE MANUAL

JULY 1962

TM-9-2520-234-35 - Page 133 of 323

PAR

76,

STEPS

2- 5

DISASSEMBLY

CHAP

5,

SEC

I I

Figure 130 (Step 2)

Remove the input shaft (A) from left-output

drive assembly (B).

Figure 132 (Step 4)

Using sling (A) and two 3/8-24 x 1 bolts (B)

and flat washers, place the assembly in an

improvised stand (C).

Figure 131 (Step 3)

Using lifting eye (A) and sling (B) to prevent

the drive assembly from turning, and using a

1-1/8-inch

wrench,

loosen

24

bolts

(C).

Figure 133 (Step 5)

Remove twenty-two bolts (A) and washers (B),

leaving two of the bolts (C), 180 degrees apart.

Remove three screws (D).

10 1