TM-9-2520-234-35

POWER TRAIN ASSEMBLY; ALLISON MODEL XTG411-2A

TECHNICAL MANUAL; FIELD AND DEPOT MAINTENANCE MANUAL

JULY 1962

TM-9-2520-234-35 - Page 131 of 323

*C2

*C2

PAR

75,

STEPS

59-6 2

DISASSEMBLY

CHAP

5,

SEC

I I

Figure 123 (Step 59)

Remove intermediate-range c1utch ancho r

bolt (A). Remove clutch anchor (B) and oil

collector (C).

Figure 125 (Step 61)

Using sling (A) and hooks (B), remove high-

range clutch assembly (C).

Figure 124 (Step 60)

Remove snap ring (A) retaining low-range sun

gear (B). Remove low- (B) and intermediate-

(C) range sun gears.

Figure 126 (Step 62)

Block up the turbine shaft with a wooden block

(A). Using a 7/16-inch wrench, remove two

self-locking bolts (B) and flat washers.

9 9