TM-9-2520-238-34
M113A1 FOV, M113A2 FOV, M548 AND M548A1
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL; RIGHT ANGLE DRIVE, COOLING FAN; GEARCASE, TRANSFER; DRIVE ASSEMBLY, FINAL; DIFFERENTIAL, STEERING CONTROL; BRAKE, SINGLE DISK; CYLINDER ASSEMBLY, HYDRAULIC BRAKE
TM-9-2520-238-34 - Page 274 of 319
TM 9-2520-238-34
REPAIR SINGLE DISK PIVOT STEER BRAKE ASSEMBLY — Continued
0030 00
DISASSEMBLY
WARNING
Parts of the brake assembly may be coated with asbestos dust. Breathing this dust can harm
personnel. Use a filter mask approved for use against asbestos dust. Never use compressed air
or dry brush to clean these assemblies. Use an industrial type vacuum cleaner with a
high-efficiency filter system to remove dust. Use water and a soft bristle brush or cloth to
remove dirt or mud.
1.
Remove release unit piston (1) with attached brake lining (2) from brake housing (3) using an arbor press. Remove
packing (4) from piston. Discard packing.
0030 00-2
Back to Top
