TM-9-2520-238-34

M113A1 FOV, M113A2 FOV, M548 AND M548A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL; RIGHT ANGLE DRIVE, COOLING FAN; GEARCASE, TRANSFER; DRIVE ASSEMBLY, FINAL; DIFFERENTIAL, STEERING CONTROL; BRAKE, SINGLE DISK; CYLINDER ASSEMBLY, HYDRAULIC BRAKE

TM-9-2520-238-34 - Page 277 of 319

TM 9-2520-238-34

REPAIR SINGLE DISK PIVOT STEER BRAKE ASSEMBLY — Continued

0030 00

CLEANING

CLEAN, INSPECT, AND REPAIR

1.

Before inspection, repair, or assembly, clean brake housing as described in (WP 0014 00). Clean piston assembly with

solution of clean water and mild castile soap. Rinse in clean water until all traces of soap disappear. Wipe dry using a

clean dry cloth.

2.

Inspect all parts. Refer to (WP 0014 00) for general inspection and repair procedures.

3.

Check brake lining for chips, cracks, or excessive wear. If lining thickness is less than 1/4 inch, replace lining.

0030 00-5