TM-9-2520-246-34-1

TRANSMISSION MODEL 3053A; TRANSMISSION TRANSFERS MODEL T-136-21 AND MODEL T-136-27; POWER TAKEOFFS MODEL WN-7-28, MODEL WND-7-28 AND MODEL P-136-C

TECHNICAL MANUAL; MAINTENANCE, DIRECT SUPPORT AND GENERAL SUPPORT LEVEL

JANUARY 1981

TM-9-2520-246-34-1 - Page 215 of 418

TM 9-2520-246-34-1

FRAME 8

1.

2.

3.

4.

5.

GO

NOTE

Readings must be within limits given in table 2-35. If read-

ings are not within given limits, throw away part and get a

new one.

Measure flange outside diameter (1).

Measure deflector inside diameter (2).

Measure oil seal outside diameter (3).

Measure input shaft cover bore (4).

Measure oil seal outside diameter (5).

TO FRAME 9

Index Number

1

2

3

4

5

Table 2-35.

Input Shaft Cover Wear Limits

—

Item/Point of Measurement

Input shaft flange outside diameter

Deflector inside diameter

Oil seal outside diameter

Input shaft cover bore

Oil seal outside diameter

Size and Fit

of New Parts

(inches)

2.522 and 2.530

2.506 and 2.511

3.353 and 3.357

3.348 and 3.350

1.501 and 1.505

Wear Limit

(inches)

2.5150

None

None

3.3495

None

2-195