TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 211 of 933

TM 9-2520-270-34

8.

9.

REMOVE TAPE (1) AND SHIPPING/

STORAGE CONTAINER GASKET (2).

a. Remove tape (1) and gasket (2) from

lip (3) of mounting flange on lower

container (4). Discard tape.

INSPECT GASKET (2) FOR

DAMAGE. See page 2-5.

a. Discard gasket (2) if damaged.

10. REPAIRER AND HELPER ATTACH

SLING (5) TO TRANSMISSION (6).

a. Attach two legs (7) of sling (5) to

front lifting eyes (8).

b. (H) Attach turn buckle leg (9) of

sling (5) to rear lifting eye (10).

11. REPAIRER AND HELPER TRANSFER

WEIGHT OF TRANSMISSION (6) TO

SLING (5) AND LIFTING DEVICE (11).

a. (H) Raise lifting device (11) until

sling (5) is tight.

b. Adjust length of turnbuckle leg (9),

if necessary.

GO TO NEXT PAGE

2-147