TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 215 of 933

TM 9-2520-270-34

11. REMOVE TWO PROTECTIVE CAP

PLUGS (1).

a. Remove two plugs (1) from splined

shafts (2) on each side of

transmission.

12. REMOVE TWO PROTECTIVE CAPS (3).

a. Remove two protective caps (3) from

two shouldered shafts (4).

14.

13. REMOVE TWO PROTECTIVE

PLUGS (5).

a. Remove one plug (5) and preformed

packing (6) from PTO drain line hole (7).

b. Remove second plug (5) and pre-

formed packing (6) from transmission

oil cooler inlet hose hole (8).

REMOVE THREE SCREWS (9) FROM

PTO ACCESS COVER (10),

a. Remove three screws (9), lock

washers (11), nuts (12), and

washers (13).

GO TO NEXT PAGE

Change 1

2-151