TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 223 of 933

TM 9-2520-270-34

24

WARNING

Hanging loads could kill or

injure you. Keep away from

hanging loads and overhead

equipment.

REPAIRER AND HELPER REMOVE

TRANSMISSION (1) FROM TIP-OVER

STAND (2) AND TIP-OVER STAND

FIXTURE (3).

a. Remove six screws (4) from fixture (3).

b. Support transmission (1) with sling (5)

and lifting device (6), Separate

transmission from stand (2) and

fixture (3).

25. INSPECT MAIN HOUSING INSERTS.

a. Inspect assembly hardware and inserts,

See page 2-5.

b, Repair inserts, if damaged. See task

REPAIR MAIN HOUSING INSERTS,

page 4-150.

END OF SUBTASK

INSTALL TRANSMISSION IN SHIPPING/STORAGE CONTAINER

1. INSTALL REAR TRANSMISSION

CONTAINER MOUNT (7) ON

MOUNTING FLANGE (8).

a. (H) Aline six holes (9) in rear

mount (7) with six holes (10) in

input flange (8).

b. Install 12 washers (11), 6 screws

and self-locking nuts (13).

2. USING 1/2-lNCH DRIVE TORQUE

WRENCH, TORQUE SIX SCREWS (12)

TO 40-45 ft-lb (6 mkg).

GO

(12),

TO NEXT PAGE

2-159