TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 227 of 933

TM 9-2520-270-34

WARNING

Hanging loads could kill or

injure you. Keep away from

hanging loads and overhead

equipment.

NOTE

The lower container has one dowel pin to help

aline screw holes in the two container halves.

The upper half of container will go on only in

one direction.

12. REPAIRER AND HELPER POSITION

UPPER CONTAINER (1) ON LOWER

CONTAINER (2).

a.

b.

c.

Using lifting device (3), position upper

container (1) over lower container (2).

(H) Aline pin (4) in lower container (2)

with hole in upper container (1).

Using lifting device (3) place upper

container (1) onto lower container (2)

and aline 20 holes (5).

13

14.

SECURE UPPER CONTAINER (1) TO

LOWER CONTAINER (2).

a. Install 20 washers (6), screws (7),

washers (6), and self-locking nuts (8).

USING 1/2-lNCH DRIVE TORQUE

WRENCH, TORQUE 20 SCREWS (7)

AND NUTS (8) TO 55-60 ft-lb (8 mkg).

15. REPAIRER AND HELPER REMOVE

LIFTING DEVICE (3) AND SLING (9).

a. Remove sling (9) from lifting

points (10) and (11).

b. Remove sling (9) from lifting

device (3).

GO TO NEXT PAGE

2-163