TM-9-2520-270-34
HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY
TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE
NOVEMBER 1984
TM-9-2520-270-34 - Page 233 of 933
TM 9-2520-270-34
8.1
TURN HANDLE (1) UNTIL SHAFT (2)
RETRACTS FULLY INTO INSERTION
TOOL (3).
8.2 PLACE INSERT (4) IN OPENING (5)
OF INSERTION TOOL (3).
8.3 TURN HANDLE (1) UNTIL TANG (6)
OF INSERT (4) IS EVEN WITH TIP
OF INSERTION TOOL (3).
GO TO NEXT PAGE
Change 2
2-168.1 (2-168.2 blank)
Back to Top
