TM-9-2520-270-34
HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY
TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE
NOVEMBER 1984
TM-9-2520-270-34 - Page 240 of 933
10. PUT NEW OVERSIZE INSERT (1) ON
DRIVE WRENCH (2). See task for proper
oversize insert and drive wrench.
13. PUT NEW STANDARD INSERT (4) ON
DRIVE WRENCH (2). See task for proper
standard insert and drive wrench.
11. INSTALL OVERSIZE INSERT (1).
a.
b.
Coat outside threads of insert (1)
with sealant compound.
Using ratchet handle and drive
wrench (2), screw insert (1) into
threaded hole in housing (3). See tas}
for proper installation depth.
12. GO TO STEP 16.
14. INSTALL STANDARD INSERT (4).
a.
b.
Coat outside threads of insert (4)
with sealant compound.
Using ratchet handle and drive
wrench (2), screw insert (4) into
threaded hole in housing (3). See task
for proper installation depth.
15. GO TO STEP 18.
2-174
TM 9-2520-270-34
Back to Top
