TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 225 of 933

TM 9-2520-270-34

WARNING

Hanging loads could kill or

injure you. Keep away from

hanging loads and overhead

equipment.

NOTE

If may be necessary to slightly raise or lower

transmission in order to install screws.

6. INSTALL REAR MOUNT (1) ON

FRAME (2).

a. Install four washers (3), lock

washers (4), and screws (5) in

rear mount (1).

7.

8.

9.

INSTALL FRONT MOUNT (6) ON

FRAME (2).

a. Install four washers (7), lock

washers (8), and screws (9) in

front mount (6).

USING 1/2-lNCH DRIVE TORQUE

WRENCH, TORQUE FOUR SCREWS (5)

AND FOUR SCREWS (9) TO

125-135 ft-lb (17-19 mkg).

REPAIRER AND HELPER REMOVE

LIFTING DEVICE (10) WITH SLING (11).

GO TO NEXT PAGE

2-161