TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 219 of 933

6.

INSTALL TWO PROTECTIVE CAPS (1).

a. Install one protective cap (1) on

shouldered shafts (2) on each side

of transmission.

8. INSTALL PROTECTIVE PLUG (7).

a. Coat preformed packing (8) with

transmission oil.

b. Install packing (8) on plug (7).

c. Install plug (7) in transmission oil

cooler outlet hose hole (9).

9. INSTALL CAP (10).

a, Install cap (10) in transmission oil

breather filter hole (11).

7. INSTALL TWO PROTECTIVE PLUGS (3).

a. Coat two preformed packings (4)

with transmission oil.

b. install one preformed packing (4)

on each plug (3).

c. Install plug (3) in PTO drain hole (5).

d. Install plug (3) in transmission oil

cooler inlet hose hole (6).

GO TO NEXT PAGE

Change 1

2-155

TM 9-2520-270-34