TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 217 of 933

PREPARE TRANSMISSION FOR SHIPPING OR STORAGE

DESCRIPTION

This task covers the following subtasks:

Subtask

Remove Transmission

Install Transmission in

It includes:

Page

from Tip-over Stand and Tip-over Stand Fixture . . . . . . . . . 2-153

Shipping/Storage Container . . . . . . . . . . . . . . . . . . . . 2-159

1. Preparation of the transmission for shipping or storage.

2. Removal of the transmission from the tip-over stand.

3. Installation of the transmission in the shipping/storage container.

INITIAL SETUP

Tools:

Funnel – (Item 32, App C)

General mechanic’s tool kit: automotive —

(Item 33, App C)

Lifting sling – (Item 44, App C)

Socket wrench attachment – (Item 84, App C)

Torque wrench – (Item 100, App C)

Lifting device with lift capability of at

least 3000 Ibs (1361 kg)

Materials/Parts:

Dessicant unit (64) – (Item 3, App B)

Masking tape — (Item 6, App B)

Sealant Compound –(Item 11, APP B)

Transmission oil – (Item 12, App B)

Gasket

PTO cover gasket

Preformed packing

Personnel Required:

Track Veh Rep 63H10

Helper (H)

Equipment Conditions:

Transmission mounted on tip-over stand. See

page 2-144.

Shipping/storage container separated into two

halves

Upper container half positioned on blocks to

protect mounting flange

Lower container half with container frame in

place on resilient container frame and

reusable parts removed

Shipping/storage container

GO TO NEXT PAGE

Change

3

2-153

TM 9-2520-270-34