TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 221 of 933

TM 9-2520-270-34

14. IF TRANSMISSION IS SERVICEABLE,

15.

GO TO STEP 15. IF NOT, GO TO

STEP 19.

LUBRICATE TRANSMISSION.

a. Remove dipstick (1).

b. Using funnel, add 2 gallons of oil

to transmission.

c. Install dipstick (1).

d. Rotate transmission 4-5 times on

stand.

16.

17.

DRAIN OIL.

a. Remove machine thread plug (2) and

gasket (3). Discard gasket.

b. Drain oil into oil pan.

INSTALL PLUG (2) in SUMP COVER(4).

a. Install new gasket (3)

on plug (2).

b. Apply sealant compound to threads of

plug (2).

c. Install plug (2) in sump cover (4).

18. USING 1/2-lNCH DRIVE TORQUE

WRENCH, TORQUE PLUG (3)

TO

55-60 ft-lb (8 mkg).

GO TO NEXT PAGE

Change

3

2-157