TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 269 of 933

CAUTION

Holes in gasket, housing, and valve must be

alined or equipment can be damaged.

11. INSTALL VALVE (1).

a. Aline gasket (2) with oil hole (3)

and screw holes (4) on housing.

b. Aline valve (1) with gasket (2).

c. While pressing valve (1) down,

install four new lock washers (5)

and screws (6).

12. USING 3/8-lNCH DRIVE TORQUE

WRENCH AND 7/16-lNCH SOCKET,

TORQUE FOUR SCREWS (6) TO

75-100 in-lb (83-115 cmkg).

END OF TASK

Change 2

3-29

TM 9-2520-270-34