TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 278 of 933

7.

8.

Do not bend

CAUTION

springs or actuator valve

assemblies. Equipment can be damaged.

DISCONNECT TWO HELlCAL

SPRINGS (1) FROM STEERING ARM

PINS (2).

a. Note broken or bent springs (1).

DISCONNECT TWO ACTUATOR VALVE

ASSEMBLIES (3) FROM TWO

STEERING ARM PINS (2).

a. Remove two assemblies (3) from

pins (2).

b. Push two assemblies (3) into two

actuator piston assemblies (4).

CAUTION

Do not bend two springs. Controller can be

damaged.

9. CONNECT TWO SPRINGS (1) TO TWO

STEERING ARM PINS (2).

3-34

TM 9-2520-270-34