TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 284 of 933

TM 9-2520-270-34

27. INSTALL PLUG (1).

a.

b.

Coat new preformed packing (2) with

transmission oil. Put packing on

plug (1).

Install plug (1) in controller

assembly (3). Hand tighten.

30. USING 3/8-lNCH DRIVE TORQUE

WRENCH AND 7/16-lNCH SOCKET,

TORQUE 10 SCREWS (6) TO

85-110 in-lb (98-127 cmkg).

31. USING 1/2-lNCH DRIVE TORQUE

WRENCH WITH ADAPTER AND

5/16-lNCH SOCKET WRENCH

ATTACHMENT, TORQUE PLUG (1)

TO 20-25 ft-lb (3 mkg).

28. INSTALL 24 NEW LOCK WASHERS (4)

AND SCREWS (5).

29. USING 1/2-lNCH DRIVE TORQUE

WRENCH, TORQUE 24 SCREWS (5)

TO 25-30 ft-lb (3-4 mkg).

32. INSTALL ELEMENT (7) ON CAP (8).

a.

b.

c.

d.

Coat two new preformed packings (9)

and o-ring (10) with transmission oil.

Install two new packings (9) on cap (8).

Install new o-ring (10) in top

of element (7).

Install element (7) on cap (8).

3-40

Change 1