TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 287 of 933

TM 9-2520-270-34

NOTE

There may be more than one washer. Retain all

washers for reinstallation.

2. REMOVE PLUG (1).

a. Using adapter and 5/16-inch socket

wrench attachment, remove plug (1).

b. Remove and discard preformed

packing (2).

c. Remove spring washer(s) (3).

3. REMOVE PRESSURE FLUID FILTER (4).

a. Using magnet, pull out filter (4) from

cavity (5).

WARNING

Solvent fumes can burn and

could poison you. Read

warning in the front of this

manual.

4. CLEAN FILTER (4).

a. Using cleaning solvent, clean filter (4).

5. INSPECT FILTER(4) FOR DAMAGE.

a. Inspect filter (4) for cuts, tears, or dents.

b. Replace filter (4) if damaged.

GO TO NEXT PAGE

Change 3

342.1 (3-42.2 blank)