TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 296 of 933

TM 9-2520-270-34

15. REMOVE STEERING ARM

ASSEMBLY (1) FROM PUNCH (2).

16. REMOVE PUNCH (2) FROM VISE.

17. CLEAN BALL SLOT (3) AND RIGID

CONNECTING LINK SLOT (4).

a. Slide rigid connecting link (5) out

of slot (4).

b. Flush slots (3) and (4) and link (5)

with transmission oil.

c. Place link (5) back in slot (4).

18. INSTALL STEERING ARM

ASSEMBLY (1).

a. Slide ball of ball arm (6) into ball

slot (3) with springs (7) facing down.

b. Lower steering arm assembly (1) onto

pin (8).

c. Install washer (9) and new cotter

pin (10).

END OF TASK

3-50