TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 301 of 933

TM 9-2520-270-34

11. INSTALL HOSE ASSEMBLY (1).

a. Connect swivel nut (2) to adapter (3).

b. Connect swivel nut (4) to elbow (5).

See task INSTALL ELBOW

(45° and 90°), page 2-179.

c. Install screw (6) through loop

clamp (7).

12. USING 3/8-lNCH DRIVE TORQUE

WRENCH AND 9/16-lNCH CROWFOOT

TORQUE SWIVEL NUT (2) TO

125-135 in-lb (144-155 cmkg).

13. USING 3/8-lNCH DRIVE TORQUE

WRENCH AND 7/16-INCH SOCKET,

TORQUE

SCREW (6) TO 100-120 in-lb

(115-138 cmkg).

14. DELETED.

15. INSTALL TWO ELBOWS (8), TWO

PREFORMED PACKINGS (9), AND HOSE

ASSEMBLY (10). See task INSTALL ELBOW

(45° and 90°), page 2-179.

GO TO NEXT PAGE

Change 3

4-5