TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 308 of 933

TM 9-2520-270-34

16. USING 3/8-lNCH DRIVE TORQUE

WRENCH AND 9/16-lNCH CROWFOOT,

TORQUE ADAPTER (1) TO 125-135 in-lb

(144-155 cmkg).

17. CONNECT SWIVEL NUT (2) TO

ADAPTER (1).

18. USING OPEN-END WRENCH, HOLD HOSE

NUT (3).

19. USING 3/8-lNCH DRIVE TORQUE

WRENCH AND 9/16-INCH CROWFOOT,

TORQUE SWIVEL NUT (2) to 125-135 in-lb

(144-155 cmkg).

20. DELETED.

21. INSTALL ADAPTER (4).

a. Coat new preformed packing (5) with

transmission oil, Install on adapter (4).

b. Screw adapter (4) into housing.

22. USING 3/8-lNCH DRIVE TORQUE

WRENCH AND 9/16-lNCH CROWFOOT,

TORQUE ADAPTER (4) TO

125-135 in-lb (144-155 cmkg).

23. INSTALL HOSE ASSEMBLY (6).

a. Connect swivel nut (7) to adapter (4).

25. CONNECT SWIVEL NUT (8) TO

24. USING 3/8-lNCH DRIVE TORQUE

45° ELBOW (9). See task INSTALL

WRENCH AND 9/16-INCH CROWFOOT,

ELBOW (45° and 90°), page 2-179.

TORQUE SWIVEL NUT (7) T0

125-135 in-lb (144-155 cmkg).

26. DELETED.

4-12

Change 3