TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 314 of 933

TM 9-2520-270-34

6.

7.

INSTALL ADAPTER (1).

a. Coat new preformed packing (2) with

transmission oil. Install on adapter (1).

b. Screw adapter (1) into housing.

USING 3/8-lNCH DRIVE TORQUE

WRENCH AND 5/8-lNCH CROWFOOT,

TORQUE ADAPTER (1) TO 125-135 in-lb

(144-155 cmkg).

10. CONNECT SWIVEL NUT (6) TO

ADAPTER (1).

11. USING OPEN-END WRENCH, HOLD HOSE

NUT (7).

12. USING 3/8-lNCH DRIVE TORQUE

WRENCH AND 9/16-INCH CROWFOOT,

TORQUE SWIVEL NUT (6) TO

125-135 in-lb (144-155 cmkg).

8. INSTALL HOSE ASSEMBLY(3).

a. Connect hose nut ( 4 ) to elbow ( 5 ). See

task INSTALL ELBOW (45° AND 900),

page 2-179.

9. DELETED.

CAUTION

Hose must be installed with a smooth even

curve and not touch hardware. Damage to

equipment can occur.

13. CONNECT HOSE ASSEMBLY (8) TO

ELBOW (9). See task INSTALL

ELBOW (45° AND 90°), page 2-179.

14. DELETED.

4-18

Change 3