TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 305 of 933

TM 9-2520-270-34

10. SECURE HOSE ASSEMBLY (1).

a. Position clamp (2). Using 3/8-inch

drive ratchet handle and 5/32-inch

socket wrench attachment, install new

screw (3).

11. USING 3/8-lNCH DRIVE TORQUE

WRENCH AND 5/32-lNCH

SOCKET WRENCH ATTACHMENT,

TORQUE SCREW (3) TO 35-45 in-lb

(40-52 cmkg).

12. USING WIRE-TWISTER PLIERS, INSTALL

NEW LOCKWIRE (4) IN SCREW (3)

AND AROUND CLAMP (2).

13. INSTALL RIGHT-HAND INTERMEDIATE

HOUSING ASSEMBLY. See task

REPLACE RIGHT-HAND INTERMEDIATE

HOUSING ASSEMBLY, page 4-170.

14. INSTALL RIGHT-HAND OUTPUT

HOUSING. See task REPLACE RIGHT-

HAND OUTPUT HOUSING, page 4-270.

15. INSTALL CONTROLLER ASSEMBLY.

See task REPLACE CONTROLLER

ASSEMBLY, page 3-32.

END OF SUBTASK

REPLACE HOSE ASSEMBLIES 11628453-3, 11629168-6, AND 11629168-9

DESCRIPTION

This subtask covers: Remove (page 4-9). Install (page 4-11).

REMOVE

1.

2.

3.

REMOVE CONTROLLER ASSEMBLY.

See task REPLACE CONTROLLER

ASSEMBLY, page 3-32.

REMOVE LEFT-HAND OUTPUT

HOUSING. See task REPLACE LEFT-

4. REMOVE POSITIVE CLUTCH. See

HAND OUTPUT HOUSING, page 4-314.

task REPLACE POSITIVE

CLUTCH, page 4-356.

REMOVE LEFT-HAND INTERMEDIATE

HOUSING ASSEMBLY. See task

5. DELETED.

REPLACE LEFT-HAND INTERMEDIATE

HOUSING ASSEMBLY, page 4-220.

GO TO NEXT PAGE

Change 3

4-9