TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 310 of 933

REPLACE HOSE ASSEMBLY 11629168-2

DESCRIPTION

This subtask covers: Remove (page 4-14). Install (page 4-14).

1. REMOVE CONTROLLER ASSEMBLY. See

task REPLACE CONTROLLER ASSEMBLY,

page 3-32.

2. DISCONNECT AND REMOVE HOSE

ASSEMBLY 11629168-2 (1).

3. REMOVE TWO HOSE TO BOSS

ELBOWS (2) AND PREFORMED

PACKINGS (3). DISCARD PACKINGS.

CAUTION

Hose must be installed with a smooth even

curve and not touch hardware. Damage to

equipment can occur.

4. INSTALL TWO ELBOWS (2), TWO

PREFORMED PACKINGS (3) AND HOSE

ASSEMBLY (1). See task INSTALL ELBOW

(45° and 90°), page 2-179.

STEPS 5 THROUGH 7 DELETED.

8. INSTALL CONTROLLER ASSEMBLY. See

task REPLACE CONTROLLER ASSEMBLY,

page 3-32.

END OF SUBTASK

4-14

Change 3

TM 9-2520-270-34