TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 317 of 933

TM 9-2520-270-34

REPLACE HOSE ASSEMBLIES 11629168-1, 11629168-3, AND 11629168-10

DESCRIPTION

This subtask covers: Remove (page 4-19). Install (page 4-21).

1.

2.

3.

4.

REMOVE CONTROLLER ASSEMBLY.

See task REPLACE CONTROLLER

ASSEMBLY, page 3-32.

REMOVE LEFT-HAND OUTPUT

HOUSING, See task REPLACE

LEFT-HAND OUTPUT HOUSING,

5.

page 4-314.

REMOVE RIGHT-HAND OUTPUT

HOUSING. See task REPLACE

RIGHT-HAND OUTPUT HOUSING,

6.

page 4-270

REMOVE RIGHT-HAND INTERMEDIATE

HOUSING ASSEMBLY. See task

7,

REPLACE RIGHT-HAND INTERMEDIATE

HOUSING ASSEMBLY, page 4-170.

REMOVE LEFT-HAND INTERMEDIATE

HOUSING ASSEMBLY. See task

REPLACE LEFT-HAND INTERMEDIATE

HOUSING ASSEMBLY, page 4-220.

REMOVE POSITIVE CLUTCH. See

task REPLACE POSITIVE

CLUTCH, page 4-356.

DELETED.

8. DISCONNECT HOSE ASSEMBLY (1)

FROM HYDRAULIC ACCUMULATOR (2).

a. Unscrew nut (3).

9. RELEASE HOSE ASSEMBLY

11629168-10 (1).

a. Using wire-twister pliers, remove and

discard two Iockwires (4).

b. Using 3/8-inch drive ratchet handle

and 5/32-inch socket wrench attach-

ment, remove bolt (5), screw (6),

and sleeve spacer (7). Discard

screw and bolt.

c. Spread open and pull off two loop

clamps (8).

10. REMOVE ADAPTER (9) AND

PREFORMED PACKING (10), DISCARD

PACKING.

GO TO NEXT PAGE

Change 3

4-19