TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 325 of 933

TM 9-2520-27034

14. REMOVE RING GEAR (1).

16. DISCONNECT HOSE ASSEMBLY (3).

a. Disconnect swivel nut (4) from hose to

boss elbow (5).

17. REMOVE ELBOW (5).

a. Remove elbow (5) and preformed

packing (6) from single disk brake (2).

Discard packing.

15. REMOVE SECOND RANGE SINGLE

DISK BRAKE (2).

18. INSTALL ELBOW (5), PREFORMED

PACKING (6), AND HOSE ASSEMBLY (3).

a. Screw elbow (5) with preformed

packing (6) into brake assembly (2)

finger tight.

b. Connect hose assembly (3) to

elbow (5) finger tight.

GO TO NEXT PAGE

Change 3

4-27