TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 330 of 933

TM 9-2520-270-34

9

10

REMOVE LEFT-HAND INTERMEDIATE

HOUSING ASSEMBLY. See task REPLACE

LEFT-HAND INTERMEDIATE

HOUSING ASSEMBLY, page 4-220.

REMOVE POSITIVE CLUTCH.

See task REPLACE POSITIVE

CLUTCH, page 4-356.

11. DELETED.

12. REMOVE CROSS SHAFT ASSEMBLY,

See task REPLACE CROSS SHAFT

ASSEMBLY, page 4-458.

13. REMOVE HYDRAULIC ACCUMULATOR.

See task REPLACE HYDRAULIC

ACCUMULATOR, page 4-448.

14. REMOVE SECOND RANGE BRAKE

ASSEMBLIES. See task REPLACE

SECOND RANGE BRAKE ASSEMBLIES,

page 4-432.

15. REMOVE RIGHT-HAND HYDRAULIC

ASSEMBLY. See task REPLACE

RIGHT-HAND HYDRAULIC ASSEMBLY,

page 4-378.

16. REMOVE INPUT BEVEL ASSEMBLY,

See task REPLACE INPUT BEVEL

ASSEMBLY, page 4-94.

17. RELEASE HOSE ASSEMBLY

11627588-11 (1).

a.

b.

c.

Using wire-twister pliers, remove two

Iockwires (2). Discard Iockwires.

Using 3/8-inch drive ratchet handle

and 5/32-inch socket wrench attach-

ment, remove two screws (3). Discard

screws.

Remove two loop clamps (4).

18. DISCONNECT AND REMOVE HOSE

ASSEMBLY (1).

19. REMOVE HOSE TO BOSS ELBOW (5),

PREFORMED PACKING (6),

ADAPTER (7), AND PREFORMED

PACKING (8). DISCARD PACKINGS.

Change 3

4-32